Orbitco-CCNA-Pastquestions.com

Helping You Pass Your CCNA Exams
 

New CCNA Routing Question.

This is an Updated real CCNA exam question (October 2013). You might see a different IP addressing.

As usual, take time to read through the question so as to clearly understand what Cisco want you to do.

Note: This routing LAB is used for demonstration only,you might see different IP addressing, VLAN configuration, Port allocation  and configuration in the real CCNA exam. But it all works the same way if you could understand the technique.

CCNA Routing Question
 
 
CCNA Routing Question
 

Question 1:

If the router R1 has a packet with a destination address 192.168.10.255, what describes the operation of the network?

A-  R1 will forward the packet out all interfaces
B - R1 will drop this packet because it is not a valid IP address
C - As R1 forwards the frame containing this packet, Sw-A will add 192.168.10.255 to its MAC table
D - R1 will encapsulate the packet in a frame with a destination MAC address of FF-FF-FF-FF-FF-FF
E - As R1 forwards the frame containing this packet, Sw-A will forward it to the device assigned the IP address of 192.168.10.255

Answer: B
 

Question 2:

Users on the 192.168.10.0/24 network must access files located on the Server 1. What route could be configured on router R1 for file requests to reach the server?

A-  ip route 0.0.0.0 0.0.0.0 s0/0/0
B - ip route 0.0.0.0 0.0.0.0 209.165.200.226
C - ip route 209.165.200.0 255.255.255.0 192.168.10.250
D - ip route 192.168.10.0 255.255.255.0 209.165.100.250

Answer: A
 
 

Question 3:

When a packet is sent from Host 1 to Server 1, in how many different frames will the packet be encapsulated as it is sent across the internetwork?

A-  0
B - 1
C - 2
D - 3
E - 4

Answer: C

Question 4:

What must be configured on the network in order for users on the Internet to view web pages located on Web Server 2?

A-  On router R2, configure a default static route to the 192.168.10.0 network
B - On router r2, configure DNS to resolve the URL assigned to Web Server 2 tothe 192.168.10.20 address
C - On router R1, configure NAT to translate an address on the 209.165.100.0/24 network to 192.168.10.20
D - On router R1, configure DHCP to assign a registered IP address on the209.165.100.0/24 network to Web Server 2

Answer: C
 
 

Question 5:

The router address 192.168.10.250 is the default gateway for both the Web Server 2and Host 1. What is the correct subnet mask for this network?

A-  255.255.255.0
B - 255.255.255.192
C - 255.255.255.250
D - 255.255.255.252

Answer: A

 
 
 
 


 
 
 
 
Sign Up For Post Updates

* required


*



Email Marketing by VerticalResponse

 
 
 

 PrivacyPolicy  Contact Us  Advertise

Copyright  2012. Orbitco-Computer-Solutions.Com. All rights reserved.  

The information provided on this website is for informational purposes only.
orbitco-ccna-pastquestions.com makes no warranties, either expressed or implied, with respect to any information contained on this website.

orbitco-ccna-pastquestions.com reserves the right to change this policy at anytime without prior notice.
Cisco
and All related product mentioned in any portion of this website are the registered trademarks of Cisco.com 

and their respective owners